TM 9-2320-269-20-1
24-VOLT CONVERTER SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Dash panel (1)
Nut (2) and Using pliers, unscrew and take out.
plate (3)
2.
Switch (4)
Push through, and pull out from under-
3.
Switch
Two lead wire
Using flat-tip screwdriver, unscrew
terminals (5)
screws (6) and take out.
NOTE
Tag wires before removal to aid installation.
4
Three lead
Take off.
wires (7)
5.
Switch (4)
Set aside.
INSTALLATION
NOTE
Check tag markings before installation to insure proper hookup.
6.
Switch
Three lead
Position on terminals (5).
terminals (5)
wires (
7.
Two lead wire
Screw in, and tighten using flat-tip
screws (6)
screwdriver.
8.
Dash panel (1)
Switch (4)
Position through panel (1).
9.
Switch (4)
Plate (3) and Screw in and tighten using pliers.
nut (2)
2-362
Previous Page
