TM 9-2320-269-20-1
STARTING MOTOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Before removing exhaust parts, clean all brackets and hardware of any dirt or corrosion
with wire brush, and coat threads with penetrating oil.
1. Right side exhaust
Two nuts (4)
Using 112-inch deep well socket and
manifold pipe (1) to
handle, unscrew and take out.
muffler pipe (2) and
clamp (3)
2. Exhaust crossover
Nut (7) and
Using 9116-inch deep well socket, handle,
pipe clamp (5) to
screw (8)
and 11/16-inch wrench, unscrew and
hanaer bracket (6)
take off.
NOTE
Before removing exhaust parts, clean all brackets and hardware of any dirt or corrosion
with wire brush, and coat threads with penetrating oil.
1. Right side exhaust
Two nuts (4)
Using 112-inch deep well socket and
manifold pipe (1) to
handle, unscrew and take out.
muffler pipe (2) and
clamp (3)
2. Exhaust crossover
Nut (7) and
Using 9116-inch deep well socket, handle,
pipe clamp (5) to
screw (8)
and 11/16-inch wrench, unscrew and
hanaer bracket (6)
take off.
TA228758
2-289
Previous Page
