TM 9-2320-269-20-1
IDLER PULLEY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Idler arm (1)
Idler arm spring (2)
Using slip-joint pliers, unhook.
2. Idler arm (1)
Screw (4), lock-
a. Using 9116-inch combination wrench,
and bracket (3)
washer (5), and
unscrew and take out.
spacer (6)
b. Get rid of lockwasher (5).
3. Bracket (3)
Idler arm (1) with
Take off.
idler pulley (7)
4. Idler arm (1)
Idler pulley (7)
Spin pulley (7) and note any wobble or
side play.
If pulley wobbles or side play Is
evident, bearing must be replaced
5. Idler arm (1)
Nut (8)
Using 314-inch box-end wrench, unscrew
and taking off.
6. Idler pulley (7)
Idler pulley
a. Secure pulley (7) in vise with
shaft (9)
soft jaws.
b. Using 13116-inch socket and handle
with 1/2-inch drive, unscrew and
take out.
7.
Idler arm (1)
a. Take off.
b. Remove pulley (7) from vise.
8.
Two bearing
Take off.
shields (10)
TA228750
2-274
Previous Page
