TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WINCHES - CONTINUED
If you have any of the following winch malfunctions, notify Direct Support Maintenance:
a. Operate noisily - knock, whine, or grind.
b. Winch controls do not operate.
HYDRAULIC SYSTEM
FLUID CLOUDY OR CONTAMINATED
Step 1. Inspect hydraulic fluid tank (9) for corrosion.
a. Open doors (10), lift cover plate (11), and unscrew filler cap (12).
b. Using transfer pump with flexible hose, pump fluid into 55-gallon (208.17 I) capacity
container.
c.
Remove tank cover (13) using 318-inch wrench, and remove filter (14) using
adjustable wrench.
d. If tank (9) is corroded or damaged, install cover (13) using 3/8-inch wrench, screw on
cap (12), lower plate (11), close doors (10), and notify Direct Support Maintenance.
TA228642
2-133
Previous Page
