TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
STEERING - CONTINUED
PULLS OR WILL NOT RECOVER FROM TURNS - CONTINUED
Step 4. Inspect brakeshoe linings (8) for damage and dirt.
a. If linings (8) are broken, cracked, or grooved, replace as needed (page 2-478).
b. If linings (8) are dirty, clean with fine sandpaper as needed.
c.
If linings (8) are greasy or oily, replace as needed (page 2-478).
Step 5. Inspect brake assembly for binding parts.
a. If parts are damaged, replace as needed (page 2-478).
b. If shoes (9), springs (10), or anchors (11) are tight, lubricate (LO 9-2320-269-12), or
replace as needed (page 2-478).
c.
Install new wheel bearings (6) as needed (page 2-611).
d. Install hub and drum assemblies (7) (page 2-611).
e. If steering still pulls or will not recover, notify Direct Support Maintenance.
TA228640
2-131
Previous Page
