TM 9-2320-269-20-1
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WINCHES
OPERATE IMPROPERLY - SLOW, JERKY, OR NOT AT ALL
Step 1. Inspect winch (1), (2) or (3) for damage and loose parts.
a. Release latches (4), and lift cover (5) for access to body winch (2).
b. If winch (1), (2) or (3) is broken, cracked, or loose, lower cover (5), latch if open, and
notify Direct Support Maintenance.
c.
If winch motor (6) is broken, cracked, or loose, lower cover (5), latch if open, and notify
Direct Support Maintenance.
d. If drive chain (7) is broken, missing, or jammed, lower cover (5), latch if open, and
notify Direct Support Maintenance.
e. If lines (8) are loose, tighten as needed.
Step 2. Test hydraulic system for pressure (page 2-137).
If pressure is within proper range, lower cover (5), latch if open, and notify Direct Support
Maintenance.
TA228641
2-132
Previous Page
