ORGANIZATIONAL TROUBLESHOOTING - continued

TM 9-2320-269-20-1

ORGANIZATIONAL TROUBLESHOOTING - CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

AIR SYSTEM AND BRAKES

BRAKES NOISY

Step 1. Inspect brake assembly for damaged, worn, and loose parts.

a. Remove hub and drum assembly (page 2-611).

b. If parts are damaged, replace as needed (page 2-478).

c. If linings (1) are worn, glazed, or dirty, replace (page 2-478), or notify Direct Support

Maintenance.

d. If springs (2), anchors (3), or shoes (4) are loose, tighten or replace as needed (page 2-611).

e. Lubricate brake assembly (LO 9-2320-269-12).

f. Install hub and drum assembly (page 2-611).

g. If brakes are still noisy, notify Direct Support Maintenance.

BRAKES RELEASE SLOWLY OR NOT AT ALL

Step 1. Inspect slack adjuster (5) for binding, and adjust brakes (page 2-478).

a. If slack adjuster (5), clevis (6), or pin (7) are damaged or dirty, clean or replace as needed (page

b. Adjust brakes as needed (page 2-478).

TA228622

2-101

Index