TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - CONTINUED
UNDERCHARGING - CONTINUED
Step 6. Test battery ground strap (1) for resistance.
a. Remove clamp (2) using 112-inch wrench and battery terminal puller.
b. Connect ohmmeter to clamp (2) and battery box (3). Check meter reading, and
disconnect.
c. If meter reads more than zero ohms resistance, remove battery (4) using lifting
strap.
d. Remove strap (1). Clean battery box (3), or replace strap (1) as needed using
two 9116-inch wrenches.
e. Install battery (4) using lifting strap.
f. Install cables (5) as needed using 9/16-inch and 3/4-inch wrenches.
a. Turn key switch to ON position.
TA228610
2-86