TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - CONTINUED
OVERCHARGING - CONTINUED
Test alternator (1) number two circuit - Continued
b. Disconnect alternator terminal plug (2). Connect voltmeter to number two
terminal (3), and ground to alternator (1).
c. Check meter reading and disconnect.
d. If meter reads zero volts, replace alternator (1) (page 2-280).
e. Connect terminal plug (2), and close hood panel (4) (page 2-7).
f. If alternator still overcharges, Notify Direct Support Maintenance.
TA228606
2-82
Previous Page
