TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM
ONE OR MORE DASH PANEL SWITCHES NOT WORKING
NOTE
This is a common procedure for the electrical switches. Dual lead and multiple lead
switches can be tested in the same way.
Step 1. Check switch (1) for corroded, loose, or damaged parts.
a. If wire terminals (2) are loose, tighten as needed.
b. Using applicable maintenance procedure, remove switch (1).
c. If switch terminals (3) are corroded or damaged, clean or replace switch (1) as
needed.
d. If wire terminals (2) are corroded or damaged, clean or repair wires (4) (page 2-
142) as needed.
TA228602
2-77
Previous Page
