TM 11-5805-715-34/EE119-DB-MMI-010-E154 CV3478/TO 31W2-2TTC39-12
used for marking the subassembly reference
(3) LOCATION (8.3) . Card fields 50,
designation such as A1, A2, etc. Card fields 22
51, and 52 are used when wiring one assembly or
through 30 are used for marking the part reference
subas- sembly to another assembly or
designation and its termination point. The marking
subassembly. The reference designation of the
is left justified.
assembly or subas- sembly is inserted in card fields
(3) SH (13.3). Card field 31 is not used.
50 through 52 before the reference designation of
(4) STP (13.4). Card fields 32, 33, and
the component part. The reference designation of
34 are used for stripping information for the end of
the assembly or subassembly is right justified. Card
the wire (strip length in inches and hundredths of
fields 53 through 61 are to be used to enter the
inches). The fields are blank when bare wire is
reference designation and terminal identification of
used. The strip lengths are inserted using decimal
the com-ponent part to which the end of the wire is
figures. The decimal point is between Card fields
to be connected.
32 and 33.
(4) SH (8.4)
. Card field 62 is used
(5) FND FER (13.5) . Card fields 35, 36,
when indi- cating a shield connection. The letter S
and 37 are for use when ferrules are to be used on
is used to signify the shield.
either shielded or coax wire. The item or find
(5) FIND LUG (8.5) . Card fields 63,
number from the parts list is right justified.
64, and 65 are used when terminating hardware is
m. LENGTH G . Card fields 38 through 43 are
being at- tached to the end of the wire. The item or
find number of the parts listed is entered. The item
used when the lead length is required (i.e., critical
or find number is right justified.
leads). The lead length information is inserted in in-
(6) FIND SLV (8.6) . Card fields 66, 67,
ches and tenths of inches. The decimal point is be-
and 68 are used when insulation sleeving or marker
tween card fields 42 and 43.
sleeving is required on the end of a lead either for
n. FROM.. (15),
insulating purposes or for marking. The item or find
(1) NOTES (15.1) . See item (8.2) .
number of the parts list is entered. The item or find
Card fields 44 through 49 are to be used for three
number is right justified.
additional notes if required. The note numbers are
h. GP (9) . Card fields 69 and 70 are used
right justified.
when certain wires in the wire run list are to be
(2) MARKING (15.2) . Card fields 50
grouped together and enclosed in a braid, shield, or
through 61 are used when marking is required on
through a piece of insulation sleeving.
the end of the wire. Card fields 50, 51, and 52 are
i. FUNCTION (10) . Card fields 71 through
used for marking the subassembly reference
designation such as A1 A2, etc. Card fields 53
80 are used, when required, to enter the circuit
through 61 are used for marking the part reference
function which the wire is a part of (i.e., GND, +
designation and its termination point. The marking
15V, RTN). When the function name does not fit
is left justified.
into the card field, abbreviations are used.
(3) SH. (15.3) Card field 62 is not used.
Nonstandard ab- breviations must be covered by a
(4) STP (15.4) . Card fields 63, 64, and
note giving the nonstandard abbreviation and
65 are used for stripping information for the end of
explaining the full meaning of the abbreviation. The
the wire (strip length in inches and hundredths of
function is left justified.
inches). The card fields are blank when bare wire is
j. KCD (11) . Card fields 7, 8, and 9 are
used. The strip lengths are inserted using decimal
used for distinguishing modular assemblies. Two-
figures. The decimal point is between card fields 63
digit alpha- numeric is used with right justification.
and 64.
k. KSQ (12) . Card fields 10, 11, and 12 are
(5) FND FER P (15.5) . Card fields 66,
used to represent wiring sequence within a key or
67, and 68 are for use when ferrules are to be used
key-code. A 3-digit number is used with right
on either shielded or coax wire. The item or find
number is right justified.
l.
.. FROM...(13)
o. SC (16) . Card fields 69 and 70 are used
(1) NOTES (13.1) . See item (6.2) .
when a supplement code is required for adding or
Card fields 13 through 18 are to be used for three
deleting a line of information. The letter "A" is used
ad- ditional notes if required. The. note numbers
for adding a line and the letter "D" for deleting a
are right justified.
line. Supplement coding is right justified.
(2) MARKING
(13.2) . Card fields 19
p. FUNCTION (17) . See item (10)
through 30 are used when marking is required on
the end of the wire. Card field 19, 20, and 21 are
3-16
Previous Page
