TM 9-2320-269-20-2
LOWER HEATER HOSE AND TEMPERATURE CONTROL VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
23.
Lower heater hose
Clamp (2)
Slide on.
assembly (1)
24.
Shutoff
Lower heater
Push on.
valve (3)
hose (1)
25.
Lower heater hose
Clamp (2)
a. Slide into place.
(1) to shutoff
b. Tighten using screwdriver.
valve (3)
26.
Lower heater
Clamp (5)
Slide on.
hose (4)
27.
Heater nipple (6)
Lower heater
Push on until seated.
hose (4)
28.
Lower heater hose
Clamp (5)
a. Slide on.
(4) to heater
b. Tighten using flat-tip screwdriver.
nipple (6)
29.
Valve arm pin (7)
FAN/TEMP
Put loop end onto valve arm
cable (8)
pin (7).
30.
FAN/TEMP cable
Clip (9)
Put in place over cable (8) and on
(8) to valve arm
valve arm pin (7), and hold.
pin (7)
31.
Clip (9) to
Screw (11)
Screw in, and tighten using 1/4-inch
temperature control
socket and handle.
valve (10)
32.
Pushnut (12)
Push onto valve arm pin (7) using slip-
joint pliers.
CAUTION
Heater hose must be tied away from exhaust manifold as manifold heat
will damage hose and cause it to fail.
33.
Lower heater hose
Plastic ties (14)
Tie hoses (1) and (13) away from exhaust
(1) to other
manifold (15) installing plastic
hose (13)
ties.
2-1304
Previous Page
