TM 9-2320-269-20-2
SINGLE SELECTOR VALVE - TO - RETURN LINE FILTER HOSE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
1.
Straight swivel
Hose assembly (2)
a. Position pail to catch hydraulic fluid.
Adapter (1)
b. Tag line.
c. Using 7/8-inch and 1-inch wrenches,
unscrew and take off.
d. Dispose of drained fluid.
2.
90swivel
Hose assembly (4)
a. Tag line.
adapter (3)
b. Using 9/16-inch and 11/16-inch
wrenches, unscrew and take off.
3.. Eight straight
Eight hose
a. Tag lines.
swivel
assemblies (6)
b. Using 7/8-inch and 11/16-inch
adapters (5)
wrenches, unscrew and take off.
NOTE
To gain access to selector valve hose assembly, move all tagged lines down and aside in console.
4.
90 swivel
Selector valve-to-
Using 7/8-inch and 1-inch wrenches,
adapter (7)
return line filter
unscrew and take off.
hose assembly (4)
5.
Straight swivel
Selector valve-to-
a. Using 7/8-inch and 1-inch wrenches,
adapter (8)
return line filter
unscrew and take off.
hose assembly (2)
b. Take out of truck.
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using
solvent. Failure to observe these precautions could cause serious injury or death.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-142).
2-1190
Previous Page
