TM 9-2320-269-20-2
BODY WINCH RELIEF VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-142).
Replace damaged or defective parts as necessary.
7.
Body winch relief
Check for cracks, breaks, dents, and
valve (1)
stripped threads.
8.
All threaded parts
Look for stripped and gouged threads.
INSTALLATION
9.
Body winch
Four swivel
a. Take out dust plugs.
relief valve (1)
adapters (2), (3),
b. Wrap threads with two turns of
(4), and (5)
teflon tape (page 2-142).
c. Secure valve (1) in vise with jaw
caps.
d. Screw in, and tighten using 1-inch
wrench.
e. Take valve (1) out of vise.
10.
Bracket (6)
Body winch
Put in position.
relief valve (1)
11.
Body winch relief
Two screws (7),
Screw in, and tighten using 112-inch
valve (1) and
new lockwashers (8),
wrench, 1/2-inch socket, and handle.
bracket (6)
and nuts(9)
TA229281
2-1076
Previous Page
