BODY WINCH RELIEF VALVE

TM 9-2320-269-20-2

RETURN LINE FILTER - CONTINUED

INSTALLATION - CONTINUED

NOTE

FOLLOW-ON MAINTENANCE:

1.

Turn on hydraulic oil tank shutoff valve (TM 9-2320-269-10).

2.

Start engine, operate auxilliary equipment (TM 9-2320-269-10), and check for leaks.

TASK ENDS HERE

BODY WINCH RELIEF VALVE

This task covers:

a. Removal

c. Inspection

e.

Pre-Load Check of Bearing

b. Disassembly

d. Reassembly

f.

Installation

INITIAL SETUP

Tools

Materials/Parts

Caps, jaw, vise

Lockwasher, valve and bracket (two required)

Handle, ratchet, 3/8-inch drive

Plugs, dust

Key, screw, socket-head, 3/16-inch

Rags, wiping (item 24,appendix C)

Pail, utility, 3-qt

Solvent, drycleaning (item 28, appendix C)

Pressure gage with hoses and hand

Tags, marking (item 29, appendix C)

shutoff valve, 5000 psi capacity

Tape, teflon (item 32, appendix C)

Socket, 3/8-inch drive, 1/2-inch

Vise, machinist's

Personnel Required

Wrench, open-end, 1/2-inch

Wrench, open-end, 9/16-inch

Two

Wrench, open-end, 7/8-inch

Wrench, open-end, 1-inch

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

WARNING

Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause

irritation.

2-1073