TM 9-2320-269-20-2
TURRET WINCH HYDRAULIC DRIVE LINES
This task covers:
a. Removal (page 2-1058)
c. Inspection/Replacement (page 2-1062)
b. Cleaning (page 2-1061)
d. Installation (page 2-1063)
INITIAL SETUP
Tools
Materials/Parts - Continued
Fish tape, 50-ft reel
Tags, marking (item 29, appendix C)
Pail, utility, 3-qt
Tape, teflon (item 32, appendix C)
Wrench, open-end, 7/8-inch
Wrench, open-end, 1-inch
Personnel Required
Materials/Parts
Two
Detergent, non-sudsing (item 12,
Equipment Condition
Rags, wiping (item 24, appendix C)
Console cover removed
Solvent, drycleaning (item 28, (page 2-1092)
appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.
1.
Adapter (1)
Turret winch
a. Position pail to catch hydraulic
control valve-to-
fluid.
turret winch
b. Using 7/8-inch and 1-inch wrenches,
relief valve hose
take off.
assembly (2)
c. Tag hose (2).
d.
Dispose of drained fluid.
2.
Adapter (3)
Turret winch
a. Using 718-inch and 1-inch wrenches,
control valve-to-
take off.
turret winch
b. Tag hose (4).
relief valve hose
assembly (4)
2-1058
Previous Page
