TM 9-2320-269-20-2
TRANSFORMER HOLDDOWN CHAINS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REPAIR - CONTINUED
1.
Chain (1)
Broken link (2)
Spread, using pliers wrench and slip-
joint pliers, and take out broken link (2).
2.
Repair link (3)
a. Using 3/8 inch wrench, open nut (4)
while screwing back along link.
b. Hook link (5) on spring onto repair
link (3).
c. Hook other link (6) onto repair
link (3).
d. Using 3/8-inch wrench, screw nut (4)
and tighten, closing repair link (3).
3.
Welded link(7)
Spring(8)
Using pliers wrench and slip-joint
pliers, open eye of spring and
take off.
4.
Link (9)
Spring (8)
a. Secure link (9) in vise
b. Using pliers wrench and slip-joint
pliers, open eye of spring and
take off.
5.
Link (9)
New spring (8)
a. Using pliers wrench and slip-joint
pliers, open eye of spring and
slip on.
b. Remove from vise.
6.
Welded link (7)
New spring (8)
Using pliers wrench and slip-joint
pliers, open eye of spring and snap onto
link (7).
TA229146
2-888
Previous Page
