TM 9-2320-269-20-2
FENDERS
This task covers:
a. Removal (page 2-797)
c.
Assembly (page 2-802)
b. Disassembly (page 2-800)
d.
Installation (page 2-802)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Lockwasher, parking light to fender
Knife, putty
(two required)
Screwdriver, cross-tip,
Rags, wiping (item 24, appendix C)
number two
Sealer, silicone rubber (item 26, appendix C)
Socket, 3/8-inch drive,
Solvent, drycleaning (item 28, appendix C)
7/16-inch
Socket, 3/8-inch drive,
Personnel Required
1/2-inch
Socket, deep well, 112-inch drive,
Two
3/8-i nch
Wrench, box-end, 1/2-inch
Equipment Condition
Materials/Parts
Hood open (page 2-7).
Brush, paint, 1/2-inch (item 5,
appendix C)
Lockwashers, fender brace to fender
(two required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Except as noted, the steps in this task apply to both front fenders. The left fender is used as the example.
Step 1 applies to left front fender only.
2-797
Previous Page
