TM 9-2320-269-20-1
RIGHT FRONT TREAD PLATE
This task covers:
a. Removal (page 2-670)
b. Installation (page 2-670)
INITIAL SETUP
Tools
Personnel Required
Extension, 3/8-inch drive, 6-inch
One
Handle, ratchet, 3/8-inch drive
Socket. 3/8-inch drive, 7/16-inch
Equipment Condition
Wrench, box-end, 7/16-inch
Battery box removed (page 2-424).
Materials/Parts
Front bumper removed (page 2-688).
Lockwasher, tread plate to winch
support, (four required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Tread plate (1)
Screw (3), nut (4),
a.
Using 7/16-inch box-end wrench,
to winch
and lockwasher (5)
7/16-inch socket, 6-inch extension,
support (2)
and handle with 3/8-inch drive,
unscrew and take off.
b.
Get rid of lockwasher (5).
2.
Three screws (6),
a.
Using 7/16-inch box-end wrench,
nuts (7), and lock-
7/16-inch socket, 6-inch extension,
washers (8)
and handle with 3/8-inch drive,
unscrew and take off.
b.
Get rid of lockwashers (8).
3.
Winch support (2)
Tread plate (1)
Take off.
INSTALLATION
4.
Tread plate (1)
Put in place.
2-670
Previous Page
