TM 9-2320-269-20-1
TURN SIGNALIMARKER LIGHTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY- CONTINUED
16.
Housing (1)
Two turn signal
Put in.
lenses (2)
17.
Two turn signal
Eight screws (3)
Screw in, and tighten using number
lenses (2)
two cross-tip screwdriver.
NOTE
If only turn signal bulb was installed, go to FOLLOW-ON MAINTENANCE.
18.
Marker light
Bulb (5)
Push in, and turn clockwise.
socket (4)
NOTE
Before installing new gasket, be sure housing and lens are clean of old gasket material to
insure proper seal.
19.
Housing (1)
New gasket (6)
Put in.
20.
Marker light
Put in.
lens (7)
21.
Marker light
Two screws (8)
Screw in, and tighten using number
one
lens(7)
cross-tip screwdriver.
NOTE
If only marker light bulb was installed, go to FOLLOW-ON MAINTENANCE.
INSTALLATION
22.
Front fender (9)
Mounting gasket (10) Put on.
23.
Light assembly (11)
Put in.
2-376
Previous Page
