TM 9-2320-269-20-1
DIMMER SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
5.
Cab floor (1)
Dimmer switch (2)
Put in position.
6.
Dimmer switch (2)
Two screws (3)
Screw in, and tighten using cross-
tip screwdriver.
7.
Wire connector (4)
Press into place.
8.
Cab floor (1)
Floormat (5) Put in place.
NOTE
FOLLOW-ON MAINTENANCE:
1. Connect battery ground cable (page 2-414).
2. Turn switch to the ON position, and check operation of dimmer
switch (TM 9-2320-269-10).
TASK ENDS HERE
TA228796
2-346
Previous Page
