TM 9-2320-269-20-1
STARTING MOTOR - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Install fuel filter (page 2-178).
2. Install battery ground cable (page 2-414).
3. Start engine, and check operation of starting motor (TM 9-2320-269-10).
TASK ENDS HERE
STARTING MOTOR GROUND CABLE
This task covers:
a. Removal (pages 2-301)
b. Installation (pages 2-302)
INITIAL SETUP:
Tools
Materials/Parts
Brush, wire
Lockwasher, heat shield
Extension, 3/8-inch drive, 9-inch
Lockwasher, frame rail
Handle, ratchet, 3/8-inch drive
Socket, 318-inch drive, 1/2-inch
Personnel Required
Socket, deep well, 3/8-inch drive,
9/16-inch
One
Socket, deep well, 3/8-inch drive,
314-inch
Equipment Condition
Wrench, open-end, 1/2-inch
(two required)
Battery ground cable disconnected
Wrench, open-end, 9/16-inch
Wrench, open-end, 3/4-inch
Fuel filter (at engine) removed (page 2-178).
2-300
Previous Page
