TAILPIPES

TM 9-2320-269-20-1

TAILPIPES

This task covers:

b. Installation (page 2-204)

INITIAL SETUP:

Tools

Materials/Parts

Brush, wire

Oil, penetrating (item 23, appendix C)

Screwdriver, flat-tip, 3/8-inch

Wrench, open-end, 1/2-inch,

Personnel Required

(two required)

Wrench, open-end, 9/16-inch

One

Wrench, open-end, 11/16-inch

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

WARNING

Exhaust systems become hot and can cause severe burns. To avoid personnel injury,

always allow vehicle to cool down before performing maintenance on the exhaust

system.

NOTE

Before removing, clean all brackets and hardware of any dirt and corrosion with a wire

brush, and coat all threads with penetrating oil.

1.

Turndown pipe clamp

Nut (3), two

Using two 1/2-inch wrenches, unscrew and

(1) to hanger brack-

washers (4), and

take off.

ets (2)

screws (5)

2.

Tailpipe (6) to

Two nuts (7)

Using 9/16-inch wrench, unscrew part way.

turndown pipe

clamp (1)

2-202