TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
AIR SYSTEM AND BRAKES - CONTINUED
BRAKES UNEVEN OR ERRATIC - CONTINUED
Step 5. Inspect brake valves (10) for damage and loose parts.
a. If valves (10) are damaged, replace using applicable maintenance procedure or notify Direct
Support Maintenance.
b. If hoses (9) of fittings (11) are loose, tighten as needed.
Step 6. Inspect wheel bearings, drums, and wheel sensors.
a. Remove hub and drum assembly using applicable maintenance procedure (page 2-611).
b. If bearings are pitted or corroded, replace (page 2-611).
c. If drum is warped or scored, notify Direct Support Maintenance.
d. If sensor or exciter ring is damaged or scored, replace.
e. Install hub and drum assembly using applicable maintenance procedure (page 2-611). TA228626
2-109
Previous Page
