TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
CRANKS BUT WILL NOT START - CONTINUED
Step 11.
Inspect magnetic switch (6) and wires (7) for corrosion, loose parts, and damage.
a. Open right side hood panel (8) (page 2-7).
b. If switch terminals (9) or wire terminals (10) are corroded or damaged, tag and remove wires
(7) using 3/8-inch and 1/2-inch wrenches.
c.
Clean or repair wires (7) (page 2-142), or replace switch (6) as needed (page 2-349).
d. Install wires (7) using 318-inch and 1/2-inch wrenches.
TA228579
2-51
Previous Page
