TM 9-2320-269-20-2
SPEEDOMETER CABLE AND ADAPTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
If only cable was disconnected for dash panel removal, go to step 26.
If only cable is being removed, go to INSTALLATION.
If only speedometer was removed, go to step 24.
14.
Transmission (1)
Adapter (2)
Screw in, and tighten using two 1-inch
wrenches.
15.
Adapter (2)
Cable (3) and
Screw in, and tighten using two 1-inch
nut (4)
wrenches.
NOTE
If only adapter was installed, go to FOLLOW-ON MAINTENANCE.
16.
Firewall (5)
Cable (3)
Slide through into place.
17.
Cable (3)
Clamps (6) and (7)
Put on, and press together.
18.
Bracket (8) and
Screw (9) and one of
Put through, and hold in place.
clamp (6)
19.
Screw (9)
One of two new lock-
Screw on, and tighten using 7116-inch
washers (10) and
socket, handle, and 7/16-inch wrench.
nut (11)
NOTE
If only cable is being installed, go to step 23.
20.
Clamp (7) and
New lockwasher (12)
crew in, and tighten using 7116-inch
firewall (5)
and screw (13)
CAUTION
Be careful when working behind dash panel not to break or disconnect any wires.
2-1342