TM 9-2320-269-20-2
REAR VIEW MIRROR ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
14.
Five weld
Five dome nuts (2)
Unscrew by hand, and take off.
screws (1)
15.
Upper support
Two nuts (4) and
a. Using 7/16-inch socket and handle,
bracket (3)
lockwashers (5)
unscrew and take off.
b. Get rid of lockwashers (5).
16.
Door (6)
Upper support
Take off.
bracket (3)
17.
Brace (7) to
Nut (4),
a. Using 7/16-inch socket and handle,
door (6)
lockwasher (5),
unscrew and take off.
and brace (7)
b. Get rid of lockwasher (5).
18.
Lower support
Two nuts (4) and
a. Using 7/16-inch socket and handle,
bracket (8) to
lockwasher (5)
unscrew and take off.
door (6)
b. Get rid of lockwashers (5).
19.
Door (6)
Lower support
Take off.
bracket (8)
INSTALLATION
20.
Lower support
Put in place, and hold.
bracket (8)
21.
Lower support
Two new lockwashers
Screw on, and tighten using 7/16-inch
bracket (8) to
(5) and nuts (4)
socket and handle.
door (6)
22.
Door (6)
Brace (7)
Put in place.
23.
Brace (7) and lower
Use support bracket-to-mirror holder brac-
support bracket (8)
ket screw (9) to aline brace (7) and
bracket (8).
24.
Brace (7) to
New lockwasher (5)
Screw on, and tighten using 7/16-inch
door (6)
and nut (4)
socket and handle.
2-1312
Previous Page
