TM 9-2320-269-20-2
TURRET WINCH RELIEF VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions
(page 2-142).
6.
All metal parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-142).
Replace damaged or defective parts as necessary.
7.
Turret winch relief
Check for cracks, breaks, dents, and
valve (1)
stripped threads.
8.
All threaded parts
Look for stripped and gouged threads.
INSTALLATION
9.
Turret winch
Two 90 swivel
a. Take out dust plugs.
relief valve (1)
adapters (2) and
b. Wrap threads with two turns of
(3) and adapters
teflon tape (page 2-142).
(4) and (5)
c. Secure valve (1) in vise with
soft jaws.
d. Screw in, and tighten using 1-inch
wrench.
e. Take valve (1) out of vise.
2-1082
Previous Page
