TM 9-2320-269-20-2
AUXILIARY TOOLS HYDRAULIC DRIVE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
WARNING
Hose assemblies are under spring tension. Do not allow hoses to snap back onto reel. Free ends of
hoses can snap back violently causing injury to personnel.
CAUTION
Hold on to hoses while unscrewing from adapters. Adapter threads can be ruined if spring tension on
hose is not relieved while unscrewing the hose.
13. Adapter (1)
Quick disconnect-
a.
Pull and hold about 12-inches
to-hose reel hose
(30.5 mm) of hose (2) from reel.
assembly (2) and
b.
Using 3/4-inch and 13/16-inch
washer (3)
wrenches, unscrew and take off.
c.
Slowly release hose (2) and allow to
wind up on reel.
14. Adapter (4)
Quick disconnect-
a.
Pull and hold about 12-inches
to-hose reel hose
(30.5 mm) of hose (5) from reel.
assembly (5) and
b.
Using 3/4-inch and 13/16-inch
washer (6)
wrenches, unscrew and take off.
c.
Slowly release hose (5) and
allow to wind up on reel.
15. Swivel
Needle valve-to-
a.
Using 7/8-inch and 1-inch wrenches,
adapter (7)
hose reel hose
unscrew and take off.
assembly (8)
b.
Tag hoses(8).
16. Swivel
Needle valve-to-
a.
Using 7/8-inch and 11/16-inch
adapter (9)
hose reel hose
wrenches, unscrew and take off.
assembly (10)
b.
Tag hoses (10).
2-952
Previous Page
