TM 9-2320-269-20-2
INNER COMPARTMENT LINER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Four tie-
Eight screws (3),
a
Using flat-tip screwdriver and 3/8-
down brackets (1)
nuts (4) and
inch wrench, with help from assistant
to body (2)
in side compartment, reach through
rear door (6) and unscrew, and take
out.
b.
2.
Body (2)
Four tiedown
Take out.
brackets (1)
3.
Liner (7) and (8)
Ten punch
a. Moving inner compartment doors
to body (2)
rivets (9)
(6) and (10) as needed, use punch
and hammer to drive out rivet
pins (11).
Have assistant in side compartment
catch pins (11).
b.
Take out rivets.
4.
Body (2)
Back piece of
Push both doors (6) and (10) forward, tpn
liner (7)
and take out liner (7).
5.
Body (2)
Front piece of
Push both doors (6) and (10) backward,
liner (8)
and take out liner (8).
INSTALLATION
6.
Body (2)
Front piece of
Put in place.
liner (8)
7.
Body (2)
Back piece of
Push both doors (6) and (10) forward,
liner (7)
and put in liner (7).
8.
Liner (7) and
Ten punch
Moving inner compartment doors (6) and
(8) to body (2)
rivets (9)
(10) as needed, push rivets (9) into place.
9.
Ten punch
Ten rivet pins (11)
Push into center of rivets (9), and use
rivets (9)
hammer to tap flush with top of
rivets (9).
10.
Body (2)
Four tiedown
Put in place.
brackets (1)
to body (2)
11.
Four tiedown
Eight screws (3),
With help of assistant, screw in
brackets (1)
new lockwashers
and tighten using flat-tip screwdriver
to body (2)
(5), and nuts (4)
and 3/8-inch wrench.
2-872