TM 9-2320-269-20-2
FRONT COMPARTMENT DOORS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
8.
Body (1)
Rear door (2)
Open by pulling down on pull rod (3).
9.
Chain (4) to
S-hook (5)
Unhook from door (2).
door (2)
10.
Body (1)
Rear door (2)
Close.
11.
Hinge cap (6)
Two sheet metal
a. Have assistant hold up door (2).
to body (1)
screws (7)
b. Using 5/16-inch socket and handle, un-
12.
Hinge rod (8)
Hinge cap (6)
Take off.
13.
Body (1)
Rear door (2)
Taking a firm grip on door (2), open
and lower until hinge rod (8) is out of
its hole, and take off.
14.
Two chains
Two S-hooks (5)
Using pliers wrench and slip-joint
(4) and (9)
pliers, spread and take off body (1).
to body (1)
15.
Pull rod (3)
Setscrew (11)
Using adjustable wrench, unscrew and
to pull latch (10)
take out.
16.
Pull latch (10)
Pull rod (3)
Take out.
17.
Pull latch (10)
Four screws (12)
Using flat-tip screwdriver, unscrew and
to door (2)
and latch (10)
take off.
INSTALLATION
18.
Door (2)
Pull latch (10)
Put in place, and hold.
19.
Pull latch (10)
Four screws (12)
Screw in, and tighten using flat-tip
to door (2)
screwdriver.
20.
Pull latch (10)
Pull rod (3)
Push into place, and turn so it faces
out at right angles to door (2).
2-856
Previous Page
