TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
v
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
HYDRAULIC SYSTEM - CONTINUED
OUTRIGGERS OPERATE IMPROPERLY - JERKY, WILL NOT HOLD, OR NOT AT ALL - CONTINUED
Step 2. Test main hydraulic pressure.
a. Install pressure gage into fitting (6), and have assistant engage power takeoff and start
engine (TM 9-2320-269-10).
b. Check gage reading, shut off engine, and disengage power takeoff.
c.
If gage reads less than 2800 psi (19360 kPa), notify Direct Support Maintenance.
Step 3. Test hydraulic system for leaks.
a. Do steps for loss of fluid (page 2-135).
b. If outriggers (5) still operate slow, jerky, or not at all, notify Direct Support
Maintenance.
TA228647
2-141
Previous Page
