TM 9-2320-269-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
AIR SYSTEM AND BRAKES - CONTINUED
PARKING BRAKE WILL NOT HOLD - CONTINUED
Step 6. Inspect brake assembly for binding parts.
a. Remove hub and drum assemblies (page 2-611).
b. If parts are damaged, replace as needed (page 2-611).
c.
If shoes (1), springs (2), or anchors (3) are tight, lubricate (LO 9-2320-269-12), or
replace as needed (page 2-478).
d. Install hub and drum assemblies (page 2-611).
e. Release internal springs (4), screwing in nuts (5) using 15116-inch wrench, and put on
caps (6).
f.
If parking brake still does not hold, notify Direct Support Maintenance.
TA228635
2-124
Previous Page
