TM 11-5805-715-34P
SECTION I
INTRODUCTION
1. Scope
This manual lists and authorizes spares and repair parts; special tools; special test, measurement, and
diagnostic equipment (TMDE); and other special support equipment required for performance of direct support
and general support maintenance of the CV-3478/TTC. It authorizes the requisitioning, issue, and disposition
of spares, repair parts and special tools as indicated by the source, maintenance and recoverability (SMR)
codes.
2. General
This Repair Parts and Special Tools List is divided into the following sections:
a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes parts which must be removed for replacement of the
authorized parts. Parts lists are composed of functional groups in ascending numeric sequence, with the parts
in each group listed in ascending item number sequence. Figure numbers are listed directly beneath the group
header.
b. Section III. Special Tools List. Not applicable.
number
(NIIN) sequence, of all National stock numbered items appearing in the listing, followed by a list in
alphameric sequence of all part numbers appearing in the listings. National stock numbers and part numbers
are cross-referenced to each illustration figure and item number appearance.
3. Explanation of Columns (Section II and III)
a. Item No. (Column (1)). Indicates the number used to identify items called out in the illustration.
b. SMR Code (Column (2)). The source, maintenance, and recoverability (SMR) code is a five-position
code containing supply/requisitioning information, maintenance category authorization criteria, and disposition
instruction, as shown in the following breakout:
Source
Maintenance
Recoverability
Code
Code
Code
XX 1st two positions
XX
X
How you get an item.
3d position
4th position
Who determines
disposition action
on an unserviceable
Who can install,
Who can do
item.
replace or use
complete repair
the item.
(see note) on
the item.
NOTE
Complete repair: Maintenance capacity, capability, and authority to perform all corrective
maintenance tasks of the "Repair" function in a use/user environment in order to restore
serviceability to a failed item.
(1) Source code. The source code tells you how to get an item needed for maintenance, repair, or
overhaul of an end item/equipment. Explanations of source codes follows:
1
Previous Page
