TM-11-5805-587-15-3 Tandem Switching Center Equipment (Preventive Maintenance and Testing) Manual

Chapter 4. ON-SITE MAINTENANCE
Table 4-1. Standard Tools and Equipment
Table 4-1. Standard Tools and Equipment - continued - TM-11-5805-587-15-30014
Table 4-1. Standard Tools and Equipment - continued - TM-11-5805-587-15-30015
Table 4-2. Special Tools and Equipment
Table 4-2. Special Tools and Equipment - continued
Table 4-3. Materials
Section II. PREVENTIVE MAINTENANCE
Daily Preventive Maintenance Checks and Services
Weekly Preventive Maintenance Checks and Services.
Monthly Preventive Maintenance Checks and Services.
Quarterly Preventive Maintenance Checks and Services.
Semiannual Preventive Checks and Services.
Section III. FINDER EQUIPMENT TESTS
Procedure. - TM-11-5805-587-15-30026
Figure 4-1. Finder Equipment, Test Setup.
Procedure - continued - TM-11-5805-587-15-30028
Procedure - continued - TM-11-5805-587-15-30029
Procedure - continued - TM-11-5805-587-15-30030
Finder Start Circuit Storage and Alarm Capabilities.
Procedure - TM-11-5805-587-15-30032
Procedure - continued - TM-11-5805-587-15-30033
Procedure - continued - TM-11-5805-587-15-30034
Procedure - continued - TM-11-5805-587-15-30035
Procedure - continued - TM-11-5805-587-15-30036
Finder and Finder Control Timeout and Alarm Capability
Procedure - TM-11-5805-587-15-30038
Procedure - continued - TM-11-5805-587-15-30039
Procedure - continued - TM-11-5805-587-15-30040
Procedure - continued - TM-11-5805-587-15-30041
Procedure - continued - TM-11-5805-587-15-30042
Procedure - continued - TM-11-5805-587-15-30043
Procedure - continued - TM-11-5805-587-15-30044
Procedure - continued - TM-11-5805-587-15-30045
Section IV. SELECTOR EQUIPMENT TESTS
Routing Digit Response Capability.
Procedure. - TM-11-5805-587-15-30048
Figure 4-2. Routing Digit Response and Timeout, and Alarm, and Test Setup.
Procedure - TM-11-5805-587-15-30050
Procedure - continued - TM-11-5805-587-15-30051
Timeout and Alarm Capability. - TM-11-5805-587-15-30052
Procedure. - TM-11-5805-587-15-30053
Procedure - continued - TM-11-5805-587-15-30054
Procedure - continued - TM-11-5805-587-15-30055
Procedure - continued - TM-11-5805-587-15-30056
Procedure - continued - TM-11-5805-587-15-30057
Control Transfer Capability.
Procedure - TM-11-5805-587-15-30059
Figure 4-3. Control Transfer and Selector Bank Marking and Seizure Test Setup
Procedure - TM-11-5805-587-15-30061
Procedure - continued - TM-11-5805-587-15-30062
Procedure - continued - TM-11-5805-587-15-30063
Selector Bank Marking and Seizure Capability
Procedure. - TM-11-5805-587-15-30065
Procedure - continued - TM-11-5805-587-15-30066
Procedure - continued - TM-11-5805-587-15-30067
Section V. REGISTER-SENDER EQUIPMENT TESTS
Test Connections and Conditions .
Procedure - TM-11-5805-587-15-30070
Figure 4-4. Dial Pulse Storage, Test Setup
Procedure - TM-11-5805-587-15-30072
Timeout Capability
Procedure. - TM-11-5805-587-15-30074
Procedure - continued - TM-11-5805-587-15-30075
Incoming MF Pulse Storage Capability
Procedure. - TM-11-5805-587-15-30077
Figure 4-5. MF Pulse Storage, Test Setup
Procedure - TM-11-5805-587-15-30079
Six-Digit Translation Capability.
Procedure. - TM-11-5805-587-15-30081
Procedure - continued - TM-11-5805-587-15-30082
Multifrequency Outpulsing Capability.
Procedure - TM-11-5805-587-15-30084
Figure 4-6. MF Outpulsing, Test Setup
Procedure - TM-11-5805-587-15-30086
Procedure - continued - TM-11-5805-587-15-30087
Procedure - continued - TM-11-5805-587-15-30088
Dial Pulse Out pulsing Capability .
Procedure. - TM-11-5805-587-15-30090
Figure 4-7. Dial Pulse Outpulsing, Test Setup
Procedure - TM-11-5805-587-15-30092
Single-Digit Access to AUTOVON and Critical-Timing Capability
Procedure. - TM-11-5805-587-15-30094
Procedure - continued - TM-11-5805-587-15-30095
Procedure - TM-11-5805-587-15-30096
Procedure - continued - TM-11-5805-587-15-30097
Section VI. TRANSLATOR EQUIPMENT TESTS
Procedure - TM-11-5805-587-15-30099
Figure 4-8. TSC to TSC Call Capability, Test Setup
Procedure - TM-11-5805-587-15-30101
Procedure - continued - TM-11-5805-587-15-30102
Procedure - continued - TM-11-5805-587-15-30103
TSC to DCO Call Capability.
Procedure. - TM-11-5805-587-15-30105
Figure 4-9. TSC to DC0 Call Capability, Test Setup
Procedure - TM-11-5805-587-15-30107
Procedure - continued - TM-11-5805-587-15-30108
Procedure - continued - TM-11-5805-587-15-30109
DC0 to TSC Call Capability.
Procedure - TM-11-5805-587-15-30111
Procedure - continued - TM-11-5805-587-15-30112
Procedure - continued - TM-11-5805-587-15-30113
Procedure - continued - TM-11-5805-587-15-30114
Local TSC Test Call (6-Digit Translation} Capability.
Procedure. - TM-11-5805-587-15-30116
Procedure - continued - TM-11-5805-587-15-30117
Procedure - continued - TM-11-5805-587-15-30118
Procedure - continued - TM-11-5805-587-15-30119
Intercept Call (First Digit 1 Through 7) Capability.
Procedure. - TM-11-5805-587-15-30121
Procedure - continued - TM-11-5805-587-15-30122
Procedure - continued - TM-11-5805-587-15-30123
Procedure - continued - TM-11-5805-587-15-30124
Alternate Routing (SOF Condition) Capability.
Procedures
Procedure. - Continued - TM-11-5805-587-15-30127
Procedure. - Continued - TM-11-5805-587-15-30128
Procedure. - Continued - TM-11-5805-587-15-30129
Procedure. - Continued - TM-11-5805-587-15-30130
Alternate Routing (ATE Condition) Capability.
Procedure - TM-11-5805-587-15-30132
Procedure - continued - TM-11-5805-587-15-30133
Procedure - continued - TM-11-5805-587-15-30134
Procedure - continued - TM-11-5805-587-15-30135
Timeout and Alarm Capability. - TM-11-5805-587-15-30136
Procedure. - TM-11-5805-587-15-30137
Procedure - continued - TM-11-5805-587-15-30138
Procedure - continued - TM-11-5805-587-15-30139
Translator Transfer Capability.
Procedure - TM-11-5805-587-15-30141
Procedure - continued - TM-11-5805-587-15-30142
COS Common Circuit Capability.
Procedure. - TM-11-5805-587-15-30144
Figure 4-10. COS Common Circuit Capability, Test Setup
Procedure - TM-11-5805-587-15-30146
Section VII. TRUNK EQUIPMENT TESTS
Tandem Trunk, Incoming Access.
Procedure - TM-11-5805-587-15-30149
Figure 4-11. Tandem trunk, Incoming Access, Test Set
Procedure - TM-11-5805-587-15-30151
Procedure - continued - TM-11-5805-587-15-30152
Procedure - continued - TM-11-5805-587-15-30153
Procedure - continued - TM-11-5805-587-15-30154
Tandem Trunk, Outgoing to Distant TSC.
Procedure - TM-11-5805-587-15-30156
Figure 4-12. Tandem Trunk, Outgoing to Distant TSC and Busy Marking, Test Setup
Procedure - continued - TM-11-5805-587-15-30158
Procedure - continued - TM-11-5805-587-15-30159
Procedure - continued - TM-11-5805-587-15-30160
Procedure - continued - TM-11-5805-587-15-30161
Tandem Trunk, Switchboard Access.
Procedure. - TM-11-5805-587-15-30163
Procedure - continued - TM-11-5805-587-15-30164
Tandem Trunk, Selector Bank Access.
Procedure - TM-11-5805-587-15-30166
Figure 4-13. Tandem Trunk, Selector Bank Access, Test Setup
Procedure - TM-11-5805-587-15-30168
Procedure - continued - TM-11-5805-587-15-30169
Procedure - continued - TM-11-5805-587-15-30170
Procedure - continued - TM-11-5805-587-15-30171
Tandem Trunk, Busy Marking.
Procedure - TM-11-5805-587-15-30173
Procedure - continued - TM-11-5805-587-15-30174
Tandem Trunk, Idle-Line Termination
Tandem Trunk, Idle-Line Termination - continued
Figure 4-14. Tandem Trunk, Idle-Line Termination, Test Setup
Procedure - TM-11-5805-587-15-30178
DC0 Trunk, Incoming Access.
Procedure. - TM-11-5805-587-15-30180
Figure 4-15. DC0 Trunk, Incoming Access, Test Setup
Procedure - TM-11-5805-587-15-30182
Procedure - continued - TM-11-5805-587-15-30183
Procedure - continued - TM-11-5805-587-15-30184
Inward Trunk
Procedure. - TM-11-5805-587-15-30186
Figure 4-16. Inward Trunk, Test Setup
Procedure - TM-11-5805-587-15-30188
Procedure - continued - TM-11-5805-587-15-30189
Outdial Trunk.
Procedure - continued - TM-11-5805-587-15-30191
Figure 4-17. Outdial Trunk, Test Setup
Procedure - TM-11-5805-587-15-30193
Procedure - continued - TM-11-5805-587-15-30194
Procedure - continued - TM-11-5805-587-15-30195
Procedure - continued - TM-11-5805-587-15-30196
Ringdown Trunk, Outgoing Access.
Procedure - TM-11-5805-587-15-30198
Ringdown Trunk, Incoming Access.
Procedure. - TM-11-5805-587-15-30200
Procedure - TM-11-5805-587-15-30201
Ringdown Trunk, Idle-Line Termination.
Section VIII. TRANSMISSION EQUIPMENT TESTS
Procedure. - TM-11-5805-587-15-30204
Figure 4-18. Transmission Path Test, TSC to TSC, Test Setup
Procedure - TM-11-5805-587-15-30206
Transmission Path Test, TSC to DCO.
Procedure. - TM-11-5805-587-15-30208
Procedure - continued - TM-11-5805-587-15-30209
Measuring Transmission Path Loss, TSC to TSC
Procedure - TM-11-5805-587-15-30211
Figure 4-19. Measuring Transmission Path Loss, Test Setup
Procedure - TM-11-5805-587-15-30213
Measuring Transmission Path Loss, TSC to DCO.
Procedure - TM-11-5805-587-15-30215
Procedure - continued - TM-11-5805-587-15-30216
DX Signaling Test.
Procedure. - TM-11-5805-587-15-30218
Figure 4-20. DX Signaling, Test Setup
Section IX. SWITCHBOARD EQUIPMENT TESTS
Switchboard Transmission Paths Test.
Procedure - TM-11-5805-587-15-30222
Procedure - continued - TM-11-5805-587-15-30223
Figure 4-21. Switchboard Transmission Paths Test, Test Setup A
Procedure - TM-11-5805-587-15-30225
Procedure - continued - TM-11-5805-587-15-30226
Procedure - continued - TM-11-5805-587-15-30227
Procedure - continued - TM-11-5805-587-15-30228
Figure 4-22. Switchboard Transmission Paths Test, Test Setup B
Switchboard Signaling and Supervision Paths Test.
Procedure. - TM-11-5805-587-15-30231
F i g u r e 4 - 2 3 . Switchboard Signaling and Supervision Paths Test, Test Setup
Procedure - TM-11-5805-587-15-30233
Procedure - continued - TM-11-5805-587-15-30234
Procedure - continued - TM-11-5805-587-15-30235
Procedure - continued - TM-11-5805-587-15-30236
Procedure - continued - TM-11-5805-587-15-30237
Procedure - continued - TM-11-5805-587-15-30238
Procedure - continued - TM-11-5805-587-15-30239
Procedure - continued - TM-11-5805-587-15-30240
Procedure - continued - TM-11-5805-587-15-30241
Procedure - continued - TM-11-5805-587-15-30242
Procedure - continued - TM-11-5805-587-15-30243
Procedure - continued - TM-11-5805-587-15-30244
Procedure - continued - TM-11-5805-587-15-30245
Procedure - continued - TM-11-5805-587-15-30246
Procedure - TM-11-5805-587-15-30247
Idle Line Termination Control Test
Figure 4-24. Idle Line Termination Control, Test Setup
Procedure - TM-11-5805-587-15-30250
Procedure - continued - TM-11-5805-587-15-30251
Procedure - continued - TM-11-5805-587-15-30252
Procedure - continued - TM-11-5805-587-15-30253
Procedure - continued - TM-11-5805-587-15-30254
Procedure - continued - TM-11-5805-587-15-30255
Procedure - continued - TM-11-5805-587-15-30256
Procedure - continued - TM-11-5805-587-15-30257
Procedure - continued - TM-11-5805-587-15-30258
Tip Busy Test
Procedure - TM-11-5805-587-15-30260
Figure 4-25. Tip Busy Test
Procedure - TM-11-5805-587-15-30262
Supervisors Call Test.
Procedure. - TM-11-5805-587-15-30264
Procedure - TM-11-5805-587-15-30265
Procedure - continued - TM-11-5805-587-15-30266
Procedure - continued - TM-11-5805-587-15-30267
Procedure - continued - TM-11-5805-587-15-30268
Idle Indicating Lamp Control Test
procedure - TM-11-5805-587-15-30270
Procedure. - TM-11-5805-587-15-30271
Section X. MISCELLANEOUS EQUIPMENT TESTS
Procedure - TM-11-5805-587-15-30273
Procedure - continued - TM-11-5805-587-15-30274
Procedure - continued - TM-11-5805-587-15-30275
Recorder-Announcer Access Capability.
Procedure. - TM-11-5805-587-15-30277
Procedure - continued - TM-11-5805-587-15-30278
Procedure - continued - TM-11-5805-587-15-30279
Peg Count and All Trunks Busy Meters.
Section XI. Alarm Testing
Table 4-12. Principal Alarms
Test Equipment.
Table 4-13. Alarm Testing
Table 4-13. Alarm Testing
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30286
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30287
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30288
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30289
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30290
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30291
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30292
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30293
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30294
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30295
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30296
Table 4-13. Alarm Testing - continued - TM-11-5805-587-15-30297
Section XII. TRANSLATOR PROGRAMMING
Figure 4-26. Typical Strapping Arrangement
Figure 4-27. Access Digit Strapping Field in Register-Sender.
Figure 4-28. Strapping Fields on Translator Shelf
Figure 4-29. Strapping Arrangements, Block Diagram.
Class of Service Field
Programming Connections.
48 Digit Strapping.
Figure 4-30. Strapping from A and AB Digit Fields.
A Digit Strapping.
Miscellaneous Routes Strapping.
Figure 4-32. Strapping for Miscellaneous Routes.
Class-of-Service Strapping.
Figure4-33. CLASS OF SERVICE and COS OUTPUT, Typical Strapping Arrangement
Figure 4-34. Strapping for Three-Digit Translations
Six-Digit Translation Strapping.
Figure 4-35. Strapping for Conflicting
Class-of-Service Isolation Strapping.
Figure 4-36. Strapping for Class-of-Service Isolation and Routing.
Figure 4-37. Typical Internal Strapping of a Route Card
Circuit Card Call Strapping.
Figure 4-38. Circuit Call Strapping Field.
Circuit Card Call Strapping - continued - TM-11-5805-587-15-30320
Circuit Card Call Strapping - continued - TM-11-5805-587-15-30321
TM-11-5805-587-15-3 Tandem Switching Center Equipment (Preventive Maintenance and Testing) Manual

Western Governors University

Privacy Statement
Press Release
Contact

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business