TM 9-2320-269-20-2
PUMP FLOW CONTROL VALVE - TO - QUICK DISCONNECT HOSE ASSEMBLY
This task covers:
a.
c.
Inspection\Replacement (page2-,175)
b.
d.
INITIAL SETUP
Tools
Materials/Parts
Pail, utility, 3-qt
Detergent, non-sudsing (item 12, appendix C)
Rags, wiping (item 24, appendix C)
Extension, 3/8-inch drive, 5-inch
Solvent, drycleaning (item 28, appendix C)
Socket, 3/8-inch drive, 7/16-inch
Tape, teflon (item 32, appendix C)
Wrench, open-end, 7/16-inch
Wrench, open-end, 7/8-inch
Personnel Required
Wrench, open-end, 1-inch
Wrench, open-end, 11/16-inch
One
Wrench, open-end, 1 -inch
Wrench, pipe
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Avoid contact with hydraulic fluid. Hydraulic fluid, if splashed on skin or in eyes, can cause irritation.
1.
Tank (1)
Shutoff valve (2)
Using 1 1/16-inch wrench, turn off.
2.
Quick-disconnect
Quick-disconnect
a.
Position pail to catch hydraulic fluid.
hose assembly (3)
body (4)
b.
Disconnect, and take off.
c.
Dispose of drained fluid.
3.
Quick-disconnect
Two clamps (5),
Using 7/16-inch socket, extension,
hose assembly (3)
screws (6), and
handle, and 7/16-inch wrench, unscrew
nuts (7)
and take off.
2-1172