AUXILIARY TOOLS HYDRAULIC DRIVES LINES - CONTINUED
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when
using solvent. Failure to observe these precautions could cause serious injury or death.
For more information on how to clean parts, go to General Maintenance Instructions
All metal parts
a. Clean in drycleaning solvent.
b. Wipe dry with clean, dry rags.
Clean in clean, soapy water.
Rinse in clean water.
Wipe connectors clean with clean rags
dampened in drycleaning solvent.
Wipe dry with clean, dry rags.
For more information on how to inspect parts, go to General Maintenance Instructions
Replace damaged or defective parts as necessary.
Look for cracks, breaks, tears, and
Look for loose connectors.
Look for damaged threads.
Before installing hoses, wrap all clean external threads with two turns of teflon tape