WINCH, WINCH SUPPORT, AND BUMPER ASSEMBLY - CONTINUED
This task is written to allow removal of the winch, winch support, and bumper assembly
as a whole assembly for access to other components.
It is not necessary to disconnect winch motor hydraulic lines to remove winch, winch
support, and bumper assembly. It is easier to take off the motor.
Hose guard (1) to
Two screws (4), nuts
a. Using 7/16-inch box-end wrench,
winch support (2)
7/16-inch socket, and handle with
(6), and hose
3/8-inch drive, unscrew and take off.