FRONT HUB AND DRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED
INSTALLATION - CONTINUED
Do not rock hub and drum assembly when putting onto spindle to avoid pushing wheel sensor out of adjustment.
25. Spindle (11)
Hub (4) and drum (3)
With assistan t, put on part way and
hold in place.
Wheel bearing (12)
Lubricate (LO 92320-26912).
Washer (13) and new
Slidewasher (13) on.
Screw nut (14) on until snug.
This procedure is for the right side hub and drum assembly and wheel bearings. The
procedure for the left side is the same. If the hub and drum assembly or wheel bearings
are being installed, go to step 35.