THERMOSTATS - CONTINUED
For more information on how to clean parts, go to General Maintenance Instructions
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame
nearby when using solvent. Failure to observe these precautions could cause serious
Injury or death.
Water outlet (1), a.
Using scraper, scrape off gasket
and two thermo-
b. Clean with clean rags dampened with
c. Wipe dry with clean, dry rags.
Two thermostats (3)
a. Place In drain pan filled with cold
water 1/4-inch over thermostat (3).
b. Heat, and using accurate thermometer,
note water temperature when thermo-
stat (3) starts to open.
Good thermostats start to open
at 170F (77F).
c. Replace thermostat (3) if defective.