RADIATOR - CONTINUED
13. Radiator (1)
Two elbows (2)
a. Note direction of elbows (2) for
b. Using 1 1/8-inch wrench, unscrew
and take off.
Block holes in radiator with clean rags to prevent any dirt or foreign particles from getting
into transmission fluid cooler.
Using 3/4-inch wrench, unscrew and
a. Note direction of elbow for assembly.
b. Using 3/4-inch wrench, unscrew and
For more information on how to clean parts, go to General Maintenance Instructions
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flames
nearby when using solvent. Failure to observe these precautions could cause serious
injury or death.
Two elbows (2),
a. Clean in drycleaning solvent.
draincock (3), and
b. Wipe dry with clean, dry rags.
Clean (TM 750-254).