Measuring Transmission Path Loss, TSC
e purpose of this test is to check trans
(1) Trunk Test Set, Str
Test Connections and Conditions. The following test co
and conditions apply to this procedure,
If the equipment must be kept in continuous operation,
i s test during periods of light traffic.
(2) The busy position for all BSY switches is with the slot
h o r i z o n t a l . The normal position is with the slot vertical.,
O trunk to access the equipment for this test.
the PATCH TO TRUNKS connector on
associated with the trunk under tes
-207190-499, which is supplied with the
e c t i n g the MULTI-FREQ SUPPLY connector, on the
SUPPLY connector, on the trunk bay frame, use
cord and plug assembly SC-207190-599, which is supplied with the