TM 11-5805-262-35P, Telephone Switchboard SB-
TM 11-5805-356-12, Terminal, Telegraph-
cated in position 3.
Telephone AN/TCC-29 (Including Terminal,
H -- Reparable item. When uneconomically re-
parable, condemn and dispose at the
Telegraph-Telephone Signal CV-425/U)
general support level.
TM 11-6806-866-34-1, Terminal, Telegraph TH-22/
D -- Reparable item. When beyond lower level
TG and Filter Assembly, Electrical F-316/U
repair capability, return to depot. Con-
demnation and disposal not authorized
below depot level.
TM 11-5815-200-12, Teletypewriter Sets AN/FGC-
c. National Stock Number. Indicates the Na-
20, AN/FGC-20X, AN/FGC-21, AN/FGC-64, AN/
tional stock number assigned to the item and will
FGC-66, AN/FGC-67, AN/FGC-67X, AN/UGC-4,
be used for requisitioning purposes.
AN/UGC-29, AN/UGC-29X, AN/FGC-159, AN/
d. Part Number. Indicates the primary number
FGC-160, and Teleprinter TT-259/FG.
used by the manufacturer (individual, company,
TM 11-5815-200-36P/2, Teletypewriter Sets AN/
firm, corporation, or Government activity), which
FGC-20X and AN/UGC-4.
controls the design and characteristic of the item
TM 11-5830-221-24P, Intercommunication Station
by means of its engineering drawings, specif-
ications standards, and inspection requirements,
TM 11-5965-206-14P, Headset-Microphone H-91A/
to identify an item or range of items.
U; Handset-Headset H-144/U, H-144A/U,
H-144B/U, H-144C/U and Headset-Microphone
When a stock numbered item is re-
quisitioned, the repair part received may
TM 11-6110-201-15P, Distribution Boxes J-1077/U
have a different part number than the
part being replaced
TM 760-6-32, Army Equipment Data Sheets
e. Federal Supply Code for Manufacturer
(FSCM). The FSCM is a 5-digit numeric code listed
Truck and Trailer Mounted
in SB 708-42 which is used to identify the
b. Action change codes indicated in the left-ban
manufacturer, distributor, or Government agency,
margin of the Wing page denote the following:
N -- Indicates an added item.
f.Description. Indicates the Federal item name
and, if required, a minimum description to identify
5. How to Locate Repair Parts
a. When National stock number or part number
g. Unit of Measure (U/M). Indicates the standard
of the basic quantity of the listed item as used in
(1) First. Using the table of contents, deter-
performing the actual maintenance function. This
mine the functional group within which the repair
measure is expressed by a two-character alphabet-
put belongs. This is necessary since illustrations,
ical abbreviation (e.g., ea, in, pr, etc.). When the
are prepared for functional groups and listings are
unit of measure differs from the unit of issue, the
divided into the same groups.
lowest unit of issue that will satisfy the required
(2) Second. Find the illustration covering the
units of measure will be requisitioned.
functional group to which the repair part belongs.
h. Quantity Incorporated in Unit. Indicates the
(3) Third. Identify the repair part on the
quantity of the item used in the breakout shown on
illustration and note the illustration figure and
the illustration figure, which is prepared for a
item number of the repair part.
functional group, subfunctional group, or an
(4) Fourth. Using the Repair Parts Listing,
find the figure and item number noted on the
4. Special Information
b. When National stock number or part number
a. The following publication pertain to the
AN/TSC-76 and its components:
TM 5-6115-365-15, Generator Sets, Gasoline and
(1) First, Using the Index of National Sto-
Numbers and Part Numbers, find the pertinent
Diesel Engine Driven, Trailer Mounted PU-
National stock number or part number. This index
TM 11-5805-201-12, Telephone Set TA-312/PT
is in ascending NIIN sequence followed by a list of
part numbers in ascending alphameric sequence
TM 11-5805-201-35, Telephone Set TA-312/PT
cross-referenced to the illustration figure number
TM 11-5805-262-20P, Telephone Switchboard SB-
and item number.