2-7. TWO-WIRE CIRCUIT WITH PUSH-TO-TALK RADIO LINK.
This task covers:
Equipment connected to Control
Control Unit RM-39, main component of
Remote Control Equipment RC-289
A remote control unit such as Control Unit RM-39 is required
when the TH-5/TG is used with push-to-talk radio on a two
wire circuit. Refer to TM 11-2887 for information concerning
connections to Control Unit RM-39.
Set to NORM.
1. Telegraph terminal
Set to 2W.
Put gray plug into SEND jack.
Gray plug (3)
Put black plug into SEND jack.
Black plug (4)
Red plug (5)
Put red plug into REC jack.